Tefal CY625D32

Данная инструкция на русском языке предназначена для мультиварки Tefal CY625D32, описывает принцип работы и основные моменты эксплуатации устройства. Перед первым включением рекомендуется внимательно изучить данное руководство.

Инструкция для мультиварки представлена в формате PDF, который поддерживается на всех современных устройствах, так что сложностей с открытием файла возникнуть не должно. Но если открыть документ не получается, установите любую программу для чтения PDF файлов, например Acrobat Reader.

Чтобы распечатать инструкцию, нужно ее сначала скачать, для этого кликните по кнопке «Скачать инструкцию», файл откроется в новой вкладке, затем нажмите комбинацию клавиш Сtrl + P и из открывшегося диалогового окна, отправьте документ на печать.

Страницы: Стр:
107
EN
Problem Possible reasons Solutions
Intense release of
pressure from pressure
limit valve.
Faulty pressure control
resulted in release of
pressure.
Send to repair and maintenance
department.
Pressure limit valve did not
fall into place.
Carefully rotate/press the
pressure limit valve to make it fall
into place.
Food is uncooked. Rice: water ratio is incorrect. Use the required rice: water ratio.
No electricity from the
power grid.
Check the electric circuit.
Steam leakage from
lid.
The sealing gasket was not
properly installed
Install the sealing gasket
properly.
“E0” displayed on
digital screen.
Temperature sensor
components in the lid in
short circuit or open circuit.
Send to repair and maintenance
department.
“E1” displayed on
digital screen.
Temperature sensor
components in the
temperature sensor cup
experience short circuit or
open circuit.
Check first the cooking pot is
well in the appliance. If E1 error
code still displayed even with
the cooking pot inside, then
send to repair and maintenance
department.
“E2” displayed on
digital screen.
The lid is not in the position
defined for the selected
cooking mode.
Please refer to the cooking table
to check the right position of
the lid for the program you have
selected.
“E11” displayed on
digital screen.
The lid is closed but not
locked, instead of being
in open position: the
temperature becomes
too high for the selected
program.
Put the lid in vertical position,
and click on “Cancel” to remove
the error code. The cooking will
restart immediately.
Страницы: Стр: 107
Комментарии (0)

Добавить комментарий

Другие Мультиварки Tefal