106
TROUBLESHOOTING AND REPAIR
Problem Possible reasons Solutions
Unable to open lid. Unable to open because of
pressure in the cooking pot.
a. Wait for the pressure in the
pot to be completely released
automatically.
b. Press and hold the Quick
Exhaust button.
Pressure in the pot is fully
released but the float valve
is stuck because it is too
dirty, and therefore unable
to fall.
a) Once the product is cold, press
the external part of the float
valve - 51.
b. For next use, please clean and
wipe the float valve - 41-42.
Unable to close lid. The float valve is stuck
because it is too dirty, and
therefore unable to fall.
a) Once the product is cold, press
the external part of the float
valve - 51.
b. For next use, please clean and
wipe the float valve - 41-42.
Direction at which lid was
closed is incorrect.
Close lid in the correct direction
according to the instruction
manual.
be unscrewed to be cleaned, and the duct cover should be checked
regularly to prevent blockage - 43. Press on the internal part of the
safety spring valve to check that it is not clogged – 44.
–Remove the cooking pot from the appliance, rinse it and dry it off
thoroughly. Do not use a scourer as this can damage the non stick
coating in the pot - 47.
–Do not immerse the appliance in water or pour water into it, clean the
housing with a damp cloth - 48-49 .
• Once all the components you just cleaned are perfectly dried, place
them all in their original position. - 50.
• Always use the cooking pot provided.
• Do not pour water or food directly into the appliance. If you inadvertently
immerse your appliance in water or spill water directly on the heating
element (when the pot is not in place), take it to your service center for
repair.
• Change the sealing gasket every 2 years
Добавить комментарий