25
УХОД ЗА РОБОТОМ
Зарядная станция с функцией самоочистки
1. Протрите контакты для зарядки. 2. Очистите окошко передатчика.
Charging & Self-empty Station
Maintenance
1. Wipe the charging nodes (contact
points).
2. Wipe the transmitter window clean.
4. Inspect the disposal vent and clean.3. Remove the dustbag and clean the
dustbag container from debris buildups
1. Pull up to remove the side brush. 2. Remove debris from the side brush and
its socket.
4. Clean the main brush and all its
components, including the brush gate
and brush compartment.
3. Pinch the tabs on the main brush gate
and lift.
Brushes
Maintenance
20
19
Charging & Self-empty Station
Maintenance
1. Wipe the charging nodes (contact
points).
2. Wipe the transmitter window clean.
4. Inspect the disposal vent and clean.3. Remove the dustbag and clean the
dustbag container from debris buildups
1. Pull up to remove the side brush. 2. Remove debris from the side brush and
its socket.
4. Clean the main brush and all its
components, including the brush gate
and brush compartment.
3. Pinch the tabs on the main brush gate
and lift.
Brushes
Maintenance
20
19
Charging & Self-empty Station
Maintenance
1. Wipe the charging nodes (contact
points).
2. Wipe the transmitter window clean.
4. Inspect the disposal vent and clean.3. Remove the dustbag and clean the
dustbag container from debris buildups
1. Pull up to remove the side brush. 2. Remove debris from the side brush and
its socket.
4. Clean the main brush and all its
components, including the brush gate
and brush compartment.
3. Pinch the tabs on the main brush gate
and lift.
Brushes
Maintenance
20
19
Charging & Self-empty Station
Maintenance
1. Wipe the charging nodes (contact
points).
2. Wipe the transmitter window clean.
4. Inspect the disposal vent and clean.3. Remove the dustbag and clean the
dustbag container from debris buildups
1. Pull up to remove the side brush. 2. Remove debris from the side brush and
its socket.
4. Clean the main brush and all its
components, including the brush gate
and brush compartment.
3. Pinch the tabs on the main brush gate
and lift.
Brushes
Maintenance
20
19
3. Извлеките мешок для пыли и очистите его кон-
тейнер от скопления мусора или любых засоров для
обеспечения свободного потока воздуха.
4. Осмотрите и очистите вентиляционное отверстие.
Добавить комментарий