
9
Размеры емкости
Зоны приготовления пищи автоматически приспосабливаются к диаметру
емкости. Тем не менее, дно емкости должно иметь минимальный диаметр,
согласующийся с соответствующей зоной приготовления. Чтобы добиться
наибольшей эффективности варочной панели, размещайте емкость в центре
зоны приготовления.
Диаметр дна индукционной посуды
Зона приготовления Минимум (мм)
190 мм 160
Зона расширения (Flex) 200
ЗОНА РАСШИРЕНИЯ (FLEXI)
Комбинация зон нагрева
Эта функция используется, если одной зоны нагрева недостаточно для
полноценного прогрева блюд (например, больших блюд для рыбы или мяса).
Чтобы включить функцию «FLEXI / расширенная зона приготовления», нажмите
соответствующую кнопку
Pan dimensions
The cooking zones are up to a limit, automatically adapted to the diameter of the
pan. However the bottom of this pan must have a minimum of diameter
according to the corresponding cooking zone. To obtain the best efficiency of
your hob, please place the pan in the centre of the cooking zone.
FLEXI ZONE
Burner Combination
This function is used if one burner is not enough to heat the dishes properly(for
example, large dishes for fish or meat). To enable the"FLEXI / Combination
cooking zone" function, press the corresponding button on the display in the
display
If necessary,it can be used as a single burner or as two independent burners.
In this case, there are two inductors operating independently of each other.
During operation of the free heating zone,only that area on which the cookware
is installed is activated.
If more than one burner is needed to place the cookware,install it starting from
the top or bottom edge of the free heating zone.
Use of two independent burners
The front and rear burners(in each case with two inductors) can be used
independently of each other. Set the required degree of heating for each burner
separately. Use only one pan/ pan for each burner.
на панели управления.
В зависимости от потребности, зону расширения можно использовать как единую
зону нагрева или как две независимые зоны. В этом случае два индуктора
работают независимо друг от друга. Во время работы зоны расширения в
качестве единой зоны активируется только та область, на которой установлена
посуда.
Если для размещения емкости требуется более одной зоны нагрева,
устанавливайте ее ближе к верхнему или нижнему краю зоны расширения.
Pan dimensions
The cooking zones are up to a limit, automatically adapted to the diameter of the
pan. However the bottom of this pan must have a minimum of diameter
according to the corresponding cooking zone. To obtain the best efficiency of
your hob, please place the pan in the centre of the cooking zone.
FLEXI ZONE
Burner Combination
This function is used if one burner is not enough to heat the dishes properly(for
example, large dishes for fish or meat). To enable the"FLEXI / Combination
cooking zone" function, press the corresponding button on the display in the
display
If necessary,it can be used as a single burner or as two independent burners.
In this case, there are two inductors operating independently of each other.
During operation of the free heating zone,only that area on which the cookware
is installed is activated.
If more than one burner is needed to place the cookware,install it starting from
the top or bottom edge of the free heating zone.
Use of two independent burners
The front and rear burners(in each case with two inductors) can be used
independently of each other. Set the required degree of heating for each burner
separately. Use only one pan/ pan for each burner.
Использование зоны расширения в качестве двух независимых
зон нагрева
Переднюю и заднюю зоны нагрева (в каждом случае с двумя индукторами)
можно использовать независимо друг от друга. Установите необходимую
степень нагрева для каждой зоны отдельно. Ставьте только одну емкость на
каждую зону нагрева.
Добавить комментарий