Haier HHK-Y63WTB
Данная инструкция на русском языке предназначена для варочной поверхности Haier HHK-Y63WTB, описывает принцип работы и основные моменты эксплуатации устройства. Перед первым включением рекомендуется внимательно изучить данное руководство.
Инструкция для варочной поверхности представлена в формате PDF, который поддерживается на всех современных устройствах, так что сложностей с открытием файла возникнуть не должно. Но если открыть документ не получается, установите любую программу для чтения PDF файлов, например Acrobat Reader.
Чтобы распечатать инструкцию, нужно ее сначала скачать, для этого кликните по кнопке «Скачать инструкцию», файл откроется в новой вкладке, затем нажмите комбинацию клавиш Сtrl + P и из открывшегося диалогового окна, отправьте документ на печать.
11
11
3. The “Boost” power will last 5 minutes and then the zone will return to 9 level
4. If you wish to cancel the Boost mode before 5 minutes, press the cooking zone
selection button, then touch the "Boost" button. The cooking zone returns to the power
level set before activation of Boost mode.
When you have finished cooking
1. Touching the heating zone selection control that
you wish to switch off.
2. Turn the cooking zone off by touch the - to “0” , make sure the display
shows”0.
3. Beware of hot surfaces
H will show which cooking zone is hot to touch. It will disappear when the
surface has cooled down to a safe temperature. It can also be used as an
energy saving function if you want to heat further pans, use the hotplate that
is still hot.
4．Turn the whole cooktop off by touching the ON/OFF control.
2. Коснитесь кнопки Boost – зона приготовления начнет работать в режиме
повышенной мощности. На дисплее питания отобразится “P”, указывая, что
в этой зоне повысилась мощность.
3. Повышение мощности продлится 5 минут, а затем зона вернется на уровень
нагрева 9
4. Если в течение указанных 5 минут возникнет необходимость отключения
функции повышенной мощности, коснитесь кнопки выбора зоны
приготовления, затем коснитесь кнопки Boost. Зона приготовления вернется
к уровню мощности, который был установлен до повышения мощности.
По окончании приготовления пищи
1. Коснитесь элемента управления зоной приготовления,
которую вы хотите отключить.
2. Чтобы выключить зону приготовления, касайтесь кнопки
“-” до тех пор, пока на дисплее не отобразится “0”.
3. Остерегайтесь нагретых поверхностей
Индикатор “Н” покажет, какая из зон приготовления слишком горяча
для касания. Он погаснет, когда поверхность охладится до безопасной
температуры. В целях энергосбережения, если вы хотите нагреть другие
емкости, используйте варочную панель, пока она еще нагрета.
4. Коснитесь элемента управления ON/OFF и полностью
выключите варочную панель.
10
Locking the Controls
• You can lock the controls to prevent unintended use (for example children
accidentally turning the cooking zones on).
• When the controls are locked, all the controls except the ON/OFF control are
disabled.
To lock the controls
Touch the child lock control .The timer indicator will show “ Lo “.
To unlock the controls
1. Make sure the hob is turned on.
2. Touch and hold the child lock control for a while.
3. You can now start using your hob.
When the hob is in the lock mode,all the controls are disable except the ON/OFF,
you can always turn the induction hob off with the ON/OFF control in an
emergency, but you shall unlock the hob first in the next operation
Use the Boost
"Boost" is the function that heats an area with greater power for a period of 5
minutes (maximum). So you can get more powerful and faster cooking.
On this hob, only the large heating zones on the right can operate with
the Boost function.
1.Press the selection button for this heating zone to assign the Boost mode, the indicator
next to the button flashes, then set the power level to 6 by touching the “+” button.
2. Touch the "Boost" button, the cooking zone will start to operate in Boost mode. The
power display shows "P" to indicate that the zone is in "boost" mode
11
3. The “Boost” power will last 5 minutes and then the zone will return to 9 level
4. If you wish to cancel the Boost mode before 5 minutes, press the cooking zone
selection button, then touch the "Boost" button. The cooking zone returns to the power
level set before activation of Boost mode.
When you have finished cooking
1. Touching the heating zone selection control that
you wish to switch off.
2. Turn the cooking zone off by touch the - to “0” , make sure the display
shows”0.
3. Beware of hot surfaces
H will show which cooking zone is hot to touch. It will disappear when the
surface has cooled down to a safe temperature. It can also be used as an
energy saving function if you want to heat further pans, use the hotplate that
is still hot.
4．Turn the whole cooktop off by touching the ON/OFF control.
11
3. The “Boost” power will last 5 minutes and then the zone will return to 9 level
4. If you wish to cancel the Boost mode before 5 minutes, press the cooking zone
selection button, then touch the "Boost" button. The cooking zone returns to the power
level set before activation of Boost mode.
When you have finished cooking
1. Touching the heating zone selection control that
you wish to switch off.
2. Turn the cooking zone off by touch the - to “0” , make sure the display
shows”0.
3. Beware of hot surfaces
H will show which cooking zone is hot to touch. It will disappear when the
surface has cooled down to a safe temperature. It can also be used as an
energy saving function if you want to heat further pans, use the hotplate that
is still hot.
4．Turn the whole cooktop off by touching the ON/OFF control.
11
3. The “Boost” power will last 5 minutes and then the zone will return to 9 level
4. If you wish to cancel the Boost mode before 5 minutes, press the cooking zone
selection button, then touch the "Boost" button. The cooking zone returns to the power
level set before activation of Boost mode.
When you have finished cooking
1. Touching the heating zone selection control that
you wish to switch off.
2. Turn the cooking zone off by touch the - to “0” , make sure the display
shows”0.
3. Beware of hot surfaces
H will show which cooking zone is hot to touch. It will disappear when the
surface has cooled down to a safe temperature. It can also be used as an
energy saving function if you want to heat further pans, use the hotplate that
is still hot.
4．Turn the whole cooktop off by touching the ON/OFF control.
11
3. The “Boost” power will last 5 minutes and then the zone will return to 9 level
4. If you wish to cancel the Boost mode before 5 minutes, press the cooking zone
selection button, then touch the "Boost" button. The cooking zone returns to the power
level set before activation of Boost mode.
When you have finished cooking
1. Touching the heating zone selection control that
you wish to switch off.
2. Turn the cooking zone off by touch the - to “0” , make sure the display
shows”0.
3. Beware of hot surfaces
H will show which cooking zone is hot to touch. It will disappear when the
surface has cooled down to a safe temperature. It can also be used as an
energy saving function if you want to heat further pans, use the hotplate that
is still hot.
4．Turn the whole cooktop off by touching the ON/OFF control.
Комментарии (0)
Другие Варочные поверхности Haier
Haier HHY-C64RVB 
Haier HHY-C64DVB 
Haier HHY-Y64NPVB 
Haier HHX-C64DVB 
Haier HHX-C64DFB 
Haier варочная поверхность HHY-Y64WFLBH + вытяжка HVY-W672GBH 
Haier HHK-Y64TJVB 
Haier HHX-Y64HPVB 
Haier HHX-M64RNX 
Haier HHX-G64CNB 
Haier HHX-Y64SFFVB 
Haier HHX-Y64TVVB 
Haier HHY-C64ROVB 
Haier HHX-Y64NFB 
Haier HHY-Y64WSLB 
Haier HHY-C64DFB 
Haier HHY-C64TOVB 
Haier HHX-G53CNMB 
Haier HHX-Y64SVVB 
Haier HHX-M64RFVLX
Добавить комментарий