Hiberg RFC-400DX NFGB inverter

Данная инструкция на русском языке предназначена для холодильника Hiberg RFC-400DX NFGB inverter, описывает принцип работы и основные моменты эксплуатации устройства. Перед первым включением рекомендуется внимательно изучить данное руководство.

Инструкция для холодильника представлена в формате PDF, который поддерживается на всех современных устройствах, так что сложностей с открытием файла возникнуть не должно. Но если открыть документ не получается, установите любую программу для чтения PDF файлов, например Acrobat Reader.

Чтобы распечатать инструкцию, нужно ее сначала скачать, для этого кликните по кнопке «Скачать инструкцию», файл откроется в новой вкладке, затем нажмите комбинацию клавиш Сtrl + P и из открывшегося диалогового окна, отправьте документ на печать.

Страницы: Стр:
43
www.hiberg.ru
English
To replace the LED light bulb, the
following steps should be taken:
1. Turn off the refrigerator. Remove the
lid with the LED bulb by pressing up
and away from yourself.
2. Hold the lid with the LED bulb with
one hand and press the latch with the
other.
3. Replace the LED bulb and x it
Problem Reasons/Solutions
The refrigerator is not
working.
• There is no electricity.
• The plug is poorly inserted into the outlet.
• The socket is malfunctioning.
The temperature
inside refrigerator
compartments is too
high.
• The doors of the compartments are not tightly closed, the seals on the
doors are damaged.
• The thermostat is in the wrong position.
• Too many products are placed inside compartments.
The products in the
refrigerator compartment
are overcooled.
• The thermostat is in the wrong position.
• The products are in contact with the back wall of refrigerator.
The compressor is
constantly running.
• Refrigerator doors do not close tightly and open too often.
• The room temperature is too high.
• The thermostat is in the wrong position.
The refrigerator is too
noisy when working.
• The refrigerator is not aligned.
• The refrigerator touches foreign objects (for example, surrounding
furniture).
• The refrigerant circulating inside the cooling system may make a low
noise, even if the compressor is not working. Don’t worry, it is normal.
Condensation appeared
on the surface of the
refrigerator.
• Condensation may occur due to changes in room temperature.
Remove the condensate. If the problem appears all the time, contact
the service center.
The surface of the
refrigerator is heating
up.
• The compressor is not working. Turn the thermostat to the maximum
cooling position and wait a few minutes. If you do not hear any noise,
it means that the compressor is not working. It is necessary to contact
the service center.
ATTENTION!
Do not try to repair the refrigerator yourself. If you were unable to fix the
problem by following the steps below, contact a qualified electrician, service
manager or the store where the refrigerator was purchased.
TROUBLESHOOTING
ATTENTION!
Replacing the lamp by an unqualified
person may result in injury or
significant damage to the product.
Defrosting
This refrigerator is equipped with a
No Frost automatic defrosting system.
Thus, during defrosting, the formed
plaque from ice and frost flows into
a special tray, from which, in turn, it
evaporates afterward.
Страницы: Стр: 40
Комментарии (0)

Добавить комментарий

Другие Холодильники Hiberg