Hiberg RFC-400DX NFGB inverter

Данная инструкция на русском языке предназначена для холодильника Hiberg RFC-400DX NFGB inverter, описывает принцип работы и основные моменты эксплуатации устройства. Перед первым включением рекомендуется внимательно изучить данное руководство.

Инструкция для холодильника представлена в формате PDF, который поддерживается на всех современных устройствах, так что сложностей с открытием файла возникнуть не должно. Но если открыть документ не получается, установите любую программу для чтения PDF файлов, например Acrobat Reader.

Чтобы распечатать инструкцию, нужно ее сначала скачать, для этого кликните по кнопке «Скачать инструкцию», файл откроется в новой вкладке, затем нажмите комбинацию клавиш Сtrl + P и из открывшегося диалогового окна, отправьте документ на печать.

Страницы: Стр:
37
www.hiberg.ru
English
To set the individual temperature, it is
necessary:
Press the touch button «Fridge» or
«Freezer»;
The indicator will start
flickering. Each subsequent press of
the button will change the temperature
on the display;
The temperature will be xed if you do
not press the button for 5 seconds.
Temperature cycle when pressing the
«Fridge» button:
2°C3°C4°C5°C
6°C7°C8°COFF2°C
«OFF» represents the OFF state, when
fridge compartment cooling is turned off.
Temperature cycle when pressing the
«Freezer» button:
-24°C-23°C-22°C-21°C-20°C
-19°C-18°C-17°C-16°C-24°C
«SMART ECO» mode
This function is recommended for
continuous use as the most optimal
and energy efcient
1. Press the «Function» touch button
several times until the corresponding
indicator flashes on the display.
2. While the indicator is flashing, press
«OK» to conrm.
3. After the indicator stops
flashing, the Smart ECO mode will
be activated. The temperature in the
refrigerator and freezer will be + 4°C
and -18 °C, respectively.
ATTENTION!
The temperature cannot be regulated
while the Smart ECO mode is active.
4. To disable the «Smart ECO» mode,
press the «Function» touch button
several times until the indicator
flashes on the display.
5. While the indicator is flashing,
press «OK». The indicator will go
off. The temperature will be set
according to the previous settings.
«VACATION» mode
This mode is recommended for use
when the refrigerator is not going to be
used for a long time (for example, during
a vacation). It provides economical
power consumption.
ATTENTION!
Before activating the «VACATION»
mode, it is necessary to remove all
perishable products from the fridge
compartment, while nothing needs to
be removed from the freezer.
To activate this mode, press the
«Function» touch button several times
until the corresponding indicator
flashes on the display.
1. While the indicator is flashing, press
«OK» to conrm.
2. After the indicator stops flashing,
the function becomes active. The
temperature in the refrigerator will be
xed at +14 °C without the possibility
of adjustment.
3. This function can be disabled by
such modes as «Smart ECO» or «Fast
cooling». To turn off the function,
press «Function» touch button
several times until the fast cooling
indicator flashes on the display.
4. While the indicator is flashing, press
«OK». The display will go off and the
temperature will be set according to
the previous settings.
«FAST COOLING» mode
This mode is intended for fast cool-
ing of products.
1. To activate this mode, press the
«Function» touch button several
times until the corresponding
indicator flashes on the display.
Страницы: Стр: 34
Комментарии (0)

Добавить комментарий

Другие Холодильники Hiberg