
32
REFRIGERATOR LEVEL
ADJUSTMENT
Level adjustment is necessary
to eliminate vibration. If refrigerator
level is not adjusted properly during
installation, the door may not close
tightly. Subsequently, this can lead to
problems with cooling, freezing and
maintaining the humidity level.
We recommend leveling the
refrigerator as follows:
1. Roll the refrigerator to the
installation site.
2. Unscrew the adjustable legs until
they come into contact with the floor.
3. Tilt the refrigerator back by 10 mm
or 0.5 degrees, making 1-2 additional
turns of the adjustable legs. This will
allow the refrigerator door to return to
the closed position.
4. If necessary, move the refrigerator.
Depending on the model, you may
need a screwdriver.
Do not forget to twist the legs back
for unhindered movement, and then
repeat the above installation steps.
ATTENTION!
The wheels are not designed to
move the refrigerator left or right and
should only be used to move back
and forth.
Depending on the refrigerator model,
various plastic and glass shelves for
storing food are included in the delivery
set. One of the glass shelves should be
installed above the vegetable container.
The remaining shelves are installed at
your choice.
ATTENTION!
Do not turn the refrigerator over
and do not put it on its side.
The maximum tilt is 45 degrees.
When lifting the refrigerator,
never hold the door handle, top
panel or tubes, as there is a high
probability of deformation and
breaking off of these parts.
AFTER INSTALLATION
After installing the refrigerator, it is
necessary to wipe it thoroughly before
usage. Recommendations for the care
of the refrigerator are listed in the
chapter «Cleaning and maintenance».
Shorten
Lengthen
Добавить комментарий