Centek CT-1701
Данная инструкция на русском языке предназначена для холодильника Centek CT-1701, описывает принцип работы и основные моменты эксплуатации устройства. Перед первым включением рекомендуется внимательно изучить данное руководство.
Инструкция для холодильника представлена в формате PDF, который поддерживается на всех современных устройствах, так что сложностей с открытием файла возникнуть не должно. Но если открыть документ не получается, установите любую программу для чтения PDF файлов, например Acrobat Reader.
Чтобы распечатать инструкцию, нужно ее сначала скачать, для этого кликните по кнопке «Скачать инструкцию», файл откроется в новой вкладке, затем нажмите комбинацию клавиш Сtrl + P и из открывшегося диалогового окна, отправьте документ на печать.
19
A few hours after connecting the refrigerator to the mains, You can put products in it.
Remove the transport spacers between the compressor and the back wall of the niche, as well as other spacers and adhesive tapes that keep the moving
parts of the device from shifting.
If the device has a protective coating of polymer film, carefully remove it, taking precautions not to damage the paint or polymer coating of the parts.
The temperature regulator is located in the cooling chamber.
Using the temperature regulator you can select the cooling mode in accordance with the requirements:
COLD – high cooling mode. Used in summertime or when the ambient temperature exceeds 35 °С.
COLDER – low cooling mode. Used in wintertime or when the ambient temperature is below 10 °С.
NORMAL – medium setting between COLD and COLDER. Usually used at normal room temperatures.
normal
OFF
cold
colder
6. CLEANING THE APPLIANCE
1. Always pull the plug from the electric socket to disconnect the refrigerator from power supply before cleaning or maintenance. Empty the chambers
of any food. Use neutral detergents. Never use abrasive powders, alkaline solutions, organic acids and hot water, as these can damage the paint coating.
Never use sharp or metallic objects as these can damage the refrigerator.
2. The door seal is contaminates easily, therefore it should be cleaned more frequently.
3. In case the refrigerator is not in use for a prolonged period of time, disconnect it from power supply, defrost, wash it and wipe dry.
7. TROUBLESHOOTING
In case of unsatisfactory operation of the refrigerator or malfunction, study this section before contacting an authorized service center. In some cases,
you can fix the problems yourself.
Problem Cause
Compressor runs for a long time
– The compressor operates longer in summertime when the ambient temperature is higher.
– Too much food loaded into the refrigerator at once.
– Hot food in the refrigerator.
– The refrigerator door is opened frequently.
– The refrigerator door is not tightly closed.
Smell – Strongly smelling foods should be tightly packed up.
– Check freshness of the food.
Refrigerator does not operate
– The refrigerator is not turned on or not connected to power supply.
– Power supply voltage too low.
– Power failure.
Refrigerator door does not close tightly – Too much food in the refrigerator.
– The refrigerator is tilted.
Noise
– The refrigerator is not installed level.
– Parts improperly assembled.
– The refrigerator touches adjacent objects (e.g. furniture).
– The characteristic noises of thermostat and compressor switching are normal and occur during
appliance operation.
The body of the refrigerator can emit heat during operation, especially in summertime. This is normal and not a sign of malfunction.
Condensation can form on the outer surfaces and the door seal of the refrigerator in areas with high atmospheric humidity. This is normal. Wipe the
condensate with a dry towel.
The compressor can emit a certain noise during operation, especially when switching on and off.
ATTENTION!
This refrigerator contains a small amount of refrigerant R600a, which is practically safe for the environment, but at the same time is a combustible gas.
In case of leakage, the refrigerant may cause eye irritation or ignite.
POWER SAVING TIPS
Keep the door closed. Open the door only when necessary; remember that each time the door is opened the temperature inside the refrigerator rises and
additional power is spent afterwards to restore it to the set value.
Do not overfill the refrigerator. Sufficient air circulation is essential for proper food preservation in a refrigerator. Overloading disturbs free air flow,
impedes refrigerator operation and causes additional power consumption.
Do not put hot food in a refrigerator. Hot food placed in a refrigerator immediately increases the temperature inside by a few degrees. Allow the food to
cool down to room temperature before putting it into the refrigerator.
Choose the right location for the refrigerator. The refrigerator should be placed at a sufficient distance from heat sources, in a well-ventilated room in
accordance with the instructions of the REFRIGERATOR INSTALLATION section.
Install the refrigerator in the coolest part of the room, well away from any heat-emitting appliances, heating pipes and direct sunlight.
Ensure that the food is properly packaged; wipe the containers dry before placing them into the refrigerator.
Do not obstruct the ventilation openings with aluminum foil, paper, etc., so that air circulation is impeded; this will reduce refrigeration efficiency.
Комментарии (0)
Другие Холодильники Centek
Добавить комментарий