17
WARNING!
- Cooling in the refrigerator is provided by a refrigerant that is filled into the refrigerator using special equipment. Do not damage the refrigerant
circulation tubes on the back of the refrigerator.
- This product contains a small amount of refrigerant, which is isobutane, a natural gas that does not harm the environment, but is flammable. When
transporting and installing the refrigerator, care must be taken not to damage any parts of the refrigerant circuit.
- Coming out of the tubes, the refrigerant can ignite or harm your health. If damage to the refrigerant circuit does occur, avoid any kind of open fire or
potential sources of ignition, and ventilate the room where the refrigerator is located for a few minutes.
- In order to avoid the formation of a flammable mixture of gas and air in the event of a refrigerant leak, the dimensions of the room where the
refrigerator is located must correspond to the amount of refrigerant used in the refrigerator.
- The volume of the room should be 1 m3 for every 8 g of refrigerant R600a in the refrigerator. The amount of refrigerant contained in your particular
refrigerator is indicated on
- the nameplate on the back of the refrigerator.
- Never turn on the refrigerator with signs of damage. If you have any doubts about the serviceability of the product, contact customer service.
2. PACKAGE CONTENTS
– Refrigerator - 1 pc.
– Glass shelf - 1 pc.
– Water collection tray - 1 pc.
– User Manual - 1 pc.
APPLIANCE DESCRIPTION
1
2
3
4
1. Door handle
2. Glass shelf
3. Thermostat knob
4. Adjustable foot
3. REFRIGERATOR TRANSPORTATION
When transporting or carrying the device, hold it by the bottom and carry it in an upright position. Do not tilt the refrigerator more than 450 degrees.
Never turn it upside down. Do not place the appliance on the sides or back. Do not transport the device if it is lying on its side, on the back or on the
front sides. Do not use the door as a carrying aid. This can disable the device. The two rear legs of the refrigerator are equipped with rollers. To move
around the kitchen and accurately install the appliance in place, tilt the refrigerator slightly in the direction of the back wall and move it. The two
front legs of the refrigerator can be adjusted in height. In order to align the device precisely, twist the front legs to the left or right so that the device
is securely on the floor.
After transporting and installing the refrigerator, wait about three hours before connecting it to the mains to be sure that the refrigerant has been
properly distributed after transportation - this is necessary for the refrigerator to work properly.
4. INSTALLING THE REFRIGERATOR
Proper installation is necessary to ensure reliable and efficient operation of the refrigerator. It is necessary to lift the refrigerator by holding it by the
bottom. Do not pull on the door or handle.
The manufacturer’s warranty does not cover damage to the door as a result of its rearrangement. Repairs caused by such circumstances will be carried
out at the expense of the owner.
Добавить комментарий