
71
РУССКИЙ РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ
Холодильники и морозильные камеры
7) Поместите дверь холодильной
камеры на среднюю петлю и устано-
вите верхнюю петлю, соедините клем-
му сигнальной цепи (4) с клеммой (1).
Соедините клемму сигнальной цепи
(2) с клеммой (3).
Установите на место крышку верх-
ней петли и заглушки. Порядок уста-
новки ручки см. в разделе 2.2.
2.4 Замена лампы Все работы по замене и обслуживанию свето-
диодных ламп должны выполняться специали-
стом компании-изготовителя, ее официального
сервисного центра или другим лицом, облада-
ющим соответствующей квалификацией.
Замена лампы в данном изделии может осу-
ществляться только квалифицированными тех-
ническими специалистами.
Крышка Заглушка
Light source in this product is replaceable only by qualified engineers.
1. Please take out the
plug before removal.
3. Take down the lamp
panel.
4. Remove the connection
terminal.
2. Remove the lampshade with
a screwdriver.
Any replacement or maintenance of the LED lamps is intended
to be made by the manufacturer,its service agent or similar
qualified person.
Light source in this product is replaceable only by qualified engineers.
1. Please take out the
plug before removal.
3. Take down the lamp
panel.
4. Remove the connection
terminal.
2. Remove the lampshade with
a screwdriver.
Any replacement or maintenance of the LED lamps is intended
to be made by the manufacturer,its service agent or similar
qualified person.
1. Перед выполнением
работ по замене
лампы обязательно
извлеките вилку
питания из розетки.
Light source in this product is replaceable only by qualified engineers.
1. Please take out the
plug before removal.
3. Take down the lamp
panel.
4. Remove the connection
terminal.
2. Remove the lampshade with
a screwdriver.
Any replacement or maintenance of the LED lamps is intended
to be made by the manufacturer,its service agent or similar
qualified person.
2. Снимите
рассеиватель
с помощью отвертки
Light source in this product is replaceable only by qualified engineers.
1. Please take out the
plug before removal.
3. Take down the lamp
panel.
4. Remove the connection
terminal.
2. Remove the lampshade with
a screwdriver.
Any replacement or maintenance of the LED lamps is intended
to be made by the manufacturer,its service agent or similar
qualified person.
3. Снимите панель
с лампами.
Light source in this product is replaceable only by qualified engineers.
1. Please take out the
plug before removal.
3. Take down the lamp
panel.
4. Remove the connection
terminal.
2. Remove the lampshade with
a screwdriver.
Any replacement or maintenance of the LED lamps is intended
to be made by the manufacturer,its service agent or similar
qualified person.
4. Отсоедините
разъем.
Добавить комментарий