
65www.hiberg.ru
• Size. Wash items of different sizes in the same wash load, to improve washing
efciency and distribution of the articles in the drum.
• Delicates. Wash delicate items separately; they require gentle treatment.
How to use the washing machine
1. Load laundry
Open the door and load the laundry. Load the articles one at a time loosely into
the drum, without overlling. Observe the load sizes given in the “Table of wash
cycle”, Overloading the machine will result in unsatisfactory washing results and
creased laundry.
2. Close door
Make sure that no laundry gets stuck between door glass and rubber seal. Close
the door so that you can hear it click shut.
3. Open water tap
Make sure that the washing machine is connected to the water mains. Open
the water tap.
4. Set the desired program
Select the required program with the “Program selector” knob. The duration
of the wash cycle is shown on the display. The washing machine automatically
displays the default temperature and spin speed settings possible for the selected
program. Adjust the temperature and/or spin speed setting if needed with the
relative buttons.
• Change temperature, if needed
Press the TEMP. button to progressively lower the temperature setting until cold
wash has been set («- -» will be shown on the display).
Pressing the button again sets the highest possible setting.
• Change spin speed, if needed
Press the SPEED button to progressively decrease the spin speed until the spin
cycle is turned off («- -» will be shown on the display). Pressing the button again
sets the highest possible setting.
• Select options, if needed
Press the button(s) to select the option; the corresponding option indicator light
is on. Press the button(s) again to cancel the option, the corresponding option
indicator light goes out.
WARNING!
• If the selected option is incompatible with the program set, the incompatibility
will be signaled by a buzzer and the corresponding indicator light will flash..
• If the selected option is incompatible with another previously set option,
only the most recent selection will remain active.
Добавить комментарий