Hiberg i-DDQ6 - 814 Sd

Данная инструкция на русском языке предназначена для стиральной машины Hiberg i-DDQ6 - 814 Sd, описывает принцип работы и основные моменты эксплуатации устройства. Перед первым включением рекомендуется внимательно изучить данное руководство.

Инструкция для стиральной машины представлена в формате PDF, который поддерживается на всех современных устройствах, так что сложностей с открытием файла возникнуть не должно. Но если открыть документ не получается, установите любую программу для чтения PDF файлов, например Acrobat Reader.

Чтобы распечатать инструкцию, нужно ее сначала скачать, для этого кликните по кнопке «Скачать инструкцию», файл откроется в новой вкладке, затем нажмите комбинацию клавиш Сtrl + P и из открывшегося диалогового окна, отправьте документ на печать.

Страницы: Стр:
50
1. Undo the four transport bolts A by the wrench (supplied) and remove them.
2. Remove the four spacers B. They will fall to the floor when you tip the machine.
3. Insert the four cover caps C which will nd in the plastic bag containing the
accessories.
Keep all the parts in safe place: you will need them again if the washer needs to
be moved to another location.
NOTE: transport the washer for the prevention of breakage as below:
the transport bolts are reinstalled;
the power cord is secured to the back of the washer.Choosing the right
location
Locations the appliance is not to be installed:
In a damp place or where the washer may be exposed to rain, etc. (As this could
cause electric shock or re);
Locations that are uneven, or unstable (As this could cause vibration and noise);
In direct sunlight (As this could cause malfunction or deformation);
Within, or on top of, unstable surfaces, including but not limited to benchtops,
timber shelving, or cabinets.
CAUTION: do not install where temperatures may reach freezing.
Страницы: Стр: 48
Комментарии (0)

Добавить комментарий

Другие Стиральные машины Hiberg