Centek CT-1743
Данная инструкция на русском языке предназначена для холодильника Centek CT-1743, описывает принцип работы и основные моменты эксплуатации устройства. Перед первым включением рекомендуется внимательно изучить данное руководство.
Инструкция для холодильника представлена в формате PDF, который поддерживается на всех современных устройствах, так что сложностей с открытием файла возникнуть не должно. Но если открыть документ не получается, установите любую программу для чтения PDF файлов, например Acrobat Reader.
Чтобы распечатать инструкцию, нужно ее сначала скачать, для этого кликните по кнопке «Скачать инструкцию», файл откроется в новой вкладке, затем нажмите комбинацию клавиш Сtrl + P и из открывшегося диалогового окна, отправьте документ на печать.
20
When the «Fast cooling» function is turned on, the temperature in the refrigerator will be
set to 2 °C, the temperature in the refrigerator drawers will drop rapidly. After 8 hours, the
function will automatically turn off. This ensures that the products will have a fresh taste and
retain their useful properties.
In the «Fast cooling» mode, the temperature in the refrigerator does not change.
Activation of the «Fast cooling» mode:
Press the function selection button (10) until the «Fast Cooling» indicator flashes, then press
and hold the OK button for 5 seconds to confirm the setting, the «Fast Cooling» indicator is
lit continuously.
Exiting the «Fast Cooling» mode:
After the total operating period of 8 hours, the «Fast Cooling» function will automatically
turn off.
While the «Fast Cooling» function is active, press the function selection button (10) until the
«Fast Cooling» indicator flashes, then press and hold the OK button for 5 seconds to confirm
the setting, the «Fast Cooling» indicator turns off, the function turns off.
NOTE: During the activation of the ECO function, the «Fast Cooling» function is automatically
turned off.
«QUICK FREEZE» FUNCTION
When the «Fast Freezing» function is enabled, the temperature in the freezer will be set to -32
°C. After 26 hours, the function will automatically turn off. A rapid decrease in the temperature
in the freezer is useful to prevent the loss of nutritional properties of products and preserve
their freshness.
In the «Fast Freezing» mode, the temperature in the freezer does not change.
Activating the «Fast Freeze» mode:
Press the function selection button (10) until the «Fast Freeze» indicator flashes, then press
and hold the OK button for 5 seconds to confirm the setting, the «Fast Freeze» indicator is
lit continuously.
Exiting the «Fast Freeze» mode:
After the total period of operation of 26 hours, the «Fast Freeze» function will automatically
turn off.
During the activity of the «Fast Freeze» function, press the function selection button (10) until
the «Fast Freeze» indicator flashes, then press and hold the OK button for 5 seconds to confirm
the setting, the «Fast Freeze» indicator turns off, the function turns off.
NOTE: During the activation of the ECO function, the «Quick Freeze» function is automatically
disabled.
BLOCKING FROM CHILDREN
When the child lock function is enabled, the temperature and functions do not change to
prevent incorrect operation.
If the button is not pressed for 3 minutes, the child lock function will be turned on automatically.
Exiting the child lock function manually:
To disable the child lock function, press and hold the OK button for 3 seconds.
DOOR OPENING SIGNAL
If the refrigerator door is open for more than 3 minutes, a continuous beep will sound, which
can be turned off by pressing any button, but will be resumed after 3 minutes if the door
remains open. The alarm will not work until the refrigerator door is closed.
POWER-OFF MEMORY
In the event of a power failure, the refrigerator will maintain the operating state set before the
power outage, when the power supply is restored.
POWER-ON DELAY
In order to protect the refrigerator compressor from damage in the event of a short-term
power outage (i.e. for less than 5 minutes), the compressor will not start immediately after
the power is turned on.
OVERHEATING ALARM (ONLY AFTER POWER OUTAGE)
When the power is turned on, if the temperature of the freezer sensor exceeds
-10 °C, the corresponding indicator and temperature start flashing. The temperature of the
freezer, when it is turned on, can be displayed by pressing any button. And the normal display
is restored after 10 seconds or by pressing any button again.
FAULT SIGNAL
If the values E0, E1, Eb, EH, EC, EE, etc. are displayed on the control panel, this indicates a
malfunction of the refrigerator. In this case, please contact a service center specialist for
troubleshooting.
6. ERROR CODE TABLE
Error code Malfunction
E0 Malfunction of the refrigerator sensor
E0 Malfunction of the freezer sensor
Eb Malfunction of the variable temperature compartment sensor
E1 Malfunction of the freezer evaporator sensor
EC Communication error between the main board and the control board
EH Malfunction of the ambient temperature sensor
EE Malfunction of the humidity sensor
7. MAINTENANCE AND CARE
When cleaning or maintaining the refrigerator, first turn off the power by removing the plug
from the socket. Empty the chambers of food. Use neutral detergents. Never use abrasive
detergents, alkaline products, organic acids and hot water as this may damage the paintwork.
Do not use sharp or metal objects as this may damage the refrigerator.
The door seal gets dirty easily and needs to be washed more often.
If you do not use the refrigerator for a long time, remove the plug from the socket, defrost,
wash and dry the refrigerator.
8. TROUBLESHOOTING TABLE
In case of improper operation or a malfunction, please study the following section before contacting an authorized service center. In some cases you may be able to solve the problem yourselves.
Problem Probable Causes
The appliance is not working
• Ensure that the power cable is properly connected to the electric socket.
• The ambient temperature is too low. Try to set a lower (colder) temperature.
• It is normal for the freezing chamber not to work during automatic defrosting or for a short time after refrigerator startup to protect the
compressor.
Unpleasant smell in the refrigerator Cleaning is probably required. Smells may come from foods, containers, packaging, etc.
Noise in the refrigerator
The following noises are normal:
• noise of the operating compressor;
• air circulation noise caused by the small fan in the freezing chamber or by other refrigerator components;
• bubbling noise similar to that of boiling water;
• crackling noises during automatic defrosting;
• clicking noise before compressor startup.
Motor operates continuously
The noise of the operating motor is normal in the following cases:
• the temperature is set too low;
• a large quantity of warm food has recently been placed in the refrigerator;
• ambient temperature too high;
• the door has been open for a long time or opened too often;
• first startup of the refrigerator or restart after a long break.
Layer of frost inside the refrigerator Ensure that the food does not impede air circulation. Check that the door is tightly closed.
Комментарии (0)
Другие Холодильники Centek
Добавить комментарий