Centek CT-1722
Данная инструкция на русском языке предназначена для холодильника Centek CT-1722, описывает принцип работы и основные моменты эксплуатации устройства. Перед первым включением рекомендуется внимательно изучить данное руководство.
Инструкция для холодильника представлена в формате PDF, который поддерживается на всех современных устройствах, так что сложностей с открытием файла возникнуть не должно. Но если открыть документ не получается, установите любую программу для чтения PDF файлов, например Acrobat Reader.
Чтобы распечатать инструкцию, нужно ее сначала скачать, для этого кликните по кнопке «Скачать инструкцию», файл откроется в новой вкладке, затем нажмите комбинацию клавиш Сtrl + P и из открывшегося диалогового окна, отправьте документ на печать.
24
not correspond to the power consumption. 12. When installing
the refrigerator, it is necessary to check the compliance of the
network characteristics and electrical parameters indicated
on a special plate on the back of the refrigerator.
17. Do not remove the plug from the outlet by the wire: this is very
dangerous.
18. Do not move the appliance close to the mains plug.
19. If the power cord is damaged, it should be replaced with a
special cord or kit provided by an authorized service center.
Cable replacement should only be carried out by qualified
personnel. Connect the device to an electrical outlett that has
a serviceable protection device (circuit breakers,fuses,ect.).
20. Do not touch the internal cooling surfaces of the refrigerator.
21. Disconnect the refrigerator from the mains before performing
any cleaning or maintenance operations. Setting the
thermostat knob to the «ВЫКЛ» (OFF) not enough to ensure
electrical safety.
22. It is prohibited to change the design of the refrigerator and the
intervention of persons not authorized by the manufacturer for
warranty repairs.
23. Do not use electrical appliances inside the food storage
compartment unless recommended by the manufacturer.
24. Do not store flammable gases or liquids inside the refrigerator.
25. Do not store glass bottles and cans of liquid in the freezer.
26. Should You decide to transfer the appliance to another person,
please pass the present manual over along with it.
OPERATING RECOMMENDATIONS
–Do not connect too many appliances to the same power supply
circuit, as this may cause a fire.
–If you do not plan to use the refrigerator for a long time,
disconnect its power plug from the outlet.
–Do not touch the inner walls of the low-temperature
compartment or the products lying in it with wet hands.
WARNING!
–Cooling in the refrigerator is provided by a refrigerant that
is filled into the refrigerator using special equipment. Do not
damage the refrigerant circulation tubes on the back of the
refrigerator.
–This product contains a small amount of refrigerant, which is
isobutane, a natural gas that does not harm the environment,
but is flammable. When transporting and installing the
refrigerator, care must be taken not to damage any parts of the
refrigerant circuit.
–Coming out of the tubes, the refrigerant can ignite or harm your
health. If damage to the refrigerant circuit does occur, avoid any
kind of open fire or potential sources of ignition, and ventilate
the room where the refrigerator is located for a few minutes.
–In order to avoid the formation of a flammable mixture of gas
and air in the event of a refrigerant leak, the dimensions of the
room where the refrigerator is located must correspond to the
amount of refrigerant used in the refrigerator.
–The volume of the room should be 1 m3 for every 8 g of
refrigerant R600a in the refrigerator. The amount of refrigerant
contained in your particular refrigerator is indicated on the
nameplate on the back of the refrigerator.
–Never turn on the refrigerator with signs of damage. If you have
any doubts about the serviceability of the product, contact
customer service.
2. PACKAGE CONTENTS
–Refrigerator - 1 pc.
–User manual - 1 pc.
–Glass shelf - 4 pcs.
–Door shelf - 5 pcs.
–Freezer container - 3 pcs.
–Container of the refrigerating chamber - 1 pc.
–Form for ice - 1 pc.
–Tray for eggs - 1 pc.
–Fastening for a door – 2 pcs.
APPLIANCE DESCRIPTION
1. LED-lamp
2. Refrigerator shelves
3. Freshness zone
4. Freezer containers
5. Adjustable feet
6. Door shelves
3. REFRIGERATOR TRANSPORTATION
When transporting or carrying the device, hold it by the bottom
and carry it in an upright position. Do not tilt the refrigerator more
than 450 degrees. Never turn it upside down. Do not place the
appliance on the sides or back. Do not transport the device if it is
lying on its side, on the back or on the front sides. Do not use the
door as a carrying aid. This can disable the device. The two rear
legs of the refrigerator are equipped with rollers. To move around
the kitchen and accurately install the appliance in place, tilt the
refrigerator slightly in the direction of the back wall and move it.
The two front legs of the refrigerator can be adjusted in height. In
order to align the device precisely, twist the front legs to the left
or right so that the device is securely on the floor.
After transporting and installing the refrigerator, wait about
three hours before connecting it to the mains to be sure that the
refrigerant has been properly distributed after transportation -
this is necessary for the refrigerator to work properly.
4. INSTALLING THE REFRIGERATOR
Proper installation is necessary to ensure reliable and efficient
operation of the refrigerator. It is necessary to lift the refrigerator
by holding it by the bottom. Do not pull on the door or handle.
The manufacturer’s warranty does not cover damage to the
door as a result of its rearrangement. Repairs caused by such
circumstances will be carried out at the expense of the owner.
OVERHANGING DOORS
ATTENTION!
For rearranging the door, it is recommended to contact a qualified
specialist. If you decide to reinstall the refrigerator door yourself,
use the recommendations listed below in this manual.
Tools required: Philips screwdriver, flat screwdriver, Allen key.
–Remove the cap from the top hinge.
–Remove the top loop. Disconnect the power cable of the
displaying.
–Open the top door and carefully lift it up. The door should come
off the hinge and completely disengage from refrigerator.
–Use a screwdriver to remove the middle hinge.
–Remove the freezer door.
–Use a screwdriver to remove the hinge on the bottom
refrigerator parts. Turn over the hinge mount and reinstall
Комментарии (0)
Другие Холодильники Centek
Добавить комментарий