Tefal X-plorer Serie 50 RG7375WH

Данная инструкция на русском языке предназначена для пылесоса Tefal X-plorer Serie 50 RG7375WH, описывает принцип работы и основные моменты эксплуатации устройства. Перед первым включением рекомендуется внимательно изучить данное руководство.

Инструкция для пылесоса представлена в формате PDF, который поддерживается на всех современных устройствах, так что сложностей с открытием файла возникнуть не должно. Но если открыть документ не получается, установите любую программу для чтения PDF файлов, например Acrobat Reader.

Чтобы распечатать инструкцию, нужно ее сначала скачать, для этого кликните по кнопке «Скачать инструкцию», файл откроется в новой вкладке, затем нажмите комбинацию клавиш Сtrl + P и из открывшегося диалогового окна, отправьте документ на печать.

Страницы: Стр:
37
5.
IS THERE A PROBLEM WITH YOUR APPLIANCE?
According to model:
The charger is getting hot:
4This is perfectly normal. The vacuum cleaner can remain permanently connected to the charger
without any risk.
The charger is connected but your appliance is not charging:
- The charger is incorrectly attached to the appliance or is faulty.
4Check that the charger is properly connected or contact an Approved Services Centre to change
the charger.
• Your appliance stops during use:
- Your appliance may be overheating.
4Stop the appliance and leave cool for at least 1 hour.
4If it overheats on repeated occasions, contact the Approved Services Centre.
The appliance stopped after the charge light was ashing:
- The appliance has run out of battery charge.
4Recharge the vacuum cleaner.
The power-brush is not working properly or makes a noise:
- The rotating brush or hose are obstructed.
4Stop the vacuum cleaner and clean them.
- The brush is worn.
4Contact an Approved Service Centre to change the brush.
- The belt is worn.
4Contact an Approved Service Centre to change the belt.
The power-brush stops during vacuuming:
- The safety function has been triggered.
4Stop the vacuum cleaner. Check that nothing is obstructing the rotation of the brush; if there is an
obstruction, remove it and clean the power-brush, then turn on the vacuum cleaner.
Your vacuum cleaner is not vacuuming as well, is making noise, whistling:
- The intake channel is partially blocked.
4Unblock it
- The dust collector is full.
Empty it and clean it.
- The dust collector is not properly tted.
4Re-position it correctly.
- The intake head is clogged.
4Remove the power-brush and clean it.
- The protective foam lter is saturated.
4Clean it.
EN
Страницы: Стр: 37
Комментарии (0)

Добавить комментарий

Другие Пылесосы Tefal