Hiberg RFC-400DX NFGW inverter

Данная инструкция на русском языке предназначена для холодильника Hiberg RFC-400DX NFGW inverter, описывает принцип работы и основные моменты эксплуатации устройства. Перед первым включением рекомендуется внимательно изучить данное руководство.

Инструкция для холодильника представлена в формате PDF, который поддерживается на всех современных устройствах, так что сложностей с открытием файла возникнуть не должно. Но если открыть документ не получается, установите любую программу для чтения PDF файлов, например Acrobat Reader.

Чтобы распечатать инструкцию, нужно ее сначала скачать, для этого кликните по кнопке «Скачать инструкцию», файл откроется в новой вкладке, затем нажмите комбинацию клавиш Сtrl + P и из открывшегося диалогового окна, отправьте документ на печать.

Страницы: Стр:
38
2. While the indicator is flashing, press
«OK» to conrm. After the indicator
stops flashing, the mode becomes
active and the temperature in the
refrigerator is set to +2°C.
«FAST FREEZE» mode
This mode is intended for fast
freezing of products.
1. To activate this mode, press the
«Function» touch button several
times until the corresponding
indicator flashes on the display.
2. While the indicator is flashing, press
«OK» to conrm. After the indicator
stops flashing, the function will
become active and the temperature
in the freezer will be set to -32°C.
ATTENTION!
This function will automatically turn
off after 26 hours or when “Smart
ECO” mode is activated.
To turn off the modes manually, press
the «Function» touch button several
times until the fast cooling indicator
flashes on the display. While the indica-
tor is flashing, press «OK» for conrma-
tion.
The display will go off and the tem-
perature will be set according to the
previous settings.
«MEMORY» function
The refrigerator will save all settings
in case of a power outage. After con-
necting to power supply, the device will
start working with the previous settings.
«ALARM» function
When the refrigerator door remains
open or is not fully closed for 3 minutes,
the appliance will produce an alarm
sound .
To turn off the sound signal, close the
refrigerator door. You can also press any
button to temporarily stop the alarm.
After about 3 minutes, the device will
sound the alarm again. If the tempera-
ture in the freezer is above -10 °C when
the refrigerator is connected to the pow-
er supply, this temperature of the freezer
will be indicated on the display.
Press any button or wait about 5
seconds and the temperature will stop
flashing and the freezer compartment
temperature will return to the previous
setting.
Air supply adjustment
(Fresh food storage zone)
Using the lever, you can increase or
decrease the supply of cold air entering
the fresh food storage zone.
Страницы: Стр: 35
Комментарии (0)

Добавить комментарий

Другие Холодильники Hiberg