Tefal X-plorer Serie 40 RG7267WH

Данная инструкция на русском языке предназначена для пылесоса Tefal X-plorer Serie 40 RG7267WH, описывает принцип работы и основные моменты эксплуатации устройства. Перед первым включением рекомендуется внимательно изучить данное руководство.

Инструкция для пылесоса представлена в формате PDF, который поддерживается на всех современных устройствах, так что сложностей с открытием файла возникнуть не должно. Но если открыть документ не получается, установите любую программу для чтения PDF файлов, например Acrobat Reader.

Чтобы распечатать инструкцию, нужно ее сначала скачать, для этого кликните по кнопке «Скачать инструкцию», файл откроется в новой вкладке, затем нажмите комбинацию клавиш Сtrl + P и из открывшегося диалогового окна, отправьте документ на печать.

Инструкция Скачать инструкцию (5.6 Мб, pdf)
Страницы: Стр:
37
5.
IS THERE A PROBLEM WITH YOUR APPLIANCE?
According to model:
• The charger is getting hot:
4 This is perfectly normal. The vacuum cleaner can remain permanently connected to the charger
without any risk.
• The charger is connected but your appliance is not charging:
- The charger is incorrectly attached to the appliance or is faulty.
4 Check that the charger is properly connected or contact an Approved Services Centre to change
the charger.
• Your appliance stops during use:
- Your appliance may be overheating.
4 Stop the appliance and leave cool for at least 1 hour.
4 If it overheats on repeated occasions, contact the Approved Services Centre.
• The appliance stopped after the charge light was ashing:
- The appliance has run out of battery charge.
4 Recharge the vacuum cleaner.
• The power-brush is not working properly or makes a noise:
- The rotating brush or hose are obstructed.
4 Stop the vacuum cleaner and clean them.
- The brush is worn.
4 Contact an Approved Service Centre to change the brush.
- The belt is worn.
4 Contact an Approved Service Centre to change the belt.
• The power-brush stops during vacuuming:
- The safety function has been triggered.
4 Stop the vacuum cleaner. Check that nothing is obstructing the rotation of the brush; if there is an
obstruction, remove it and clean the power-brush, then turn on the vacuum cleaner.
• Your vacuum cleaner is not vacuuming as well, is making noise, whistling:
- The intake channel is partially blocked.
4 Unblock it
- The dust collector is full.
Empty it and clean it.
- The dust collector is not properly tted.
4 Re-position it correctly.
- The intake head is clogged.
4 Remove the power-brush and clean it.
- The protective foam lter is saturated.
4 Clean it.
EN
Страницы: Стр: 37
Комментарии (0)

Добавить комментарий

Другие Пылесосы Tefal

Tefal X-Force Flex 8.60 Animal Kit TY9679WOTefal X-Force Flex 8.60 Animal Kit TY9679WO Tefal Compact Power TW3953Tefal Compact Power TW3953 Tefal X-plorer Serie 120 AI Animal & Allergy RG7867WHTefal X-plorer Serie 120 AI Animal & Allergy RG7867WH Tefal Swift Power Cyclonic TW2971Tefal Swift Power Cyclonic TW2971 Tefal X-plorer Serie 45 RG8227WHTefal X-plorer Serie 45 RG8227WH Tefal Compact Power TW3927Tefal Compact Power TW3927 Tefal Cordless Stick Cleaner TY6545RHTefal Cordless Stick Cleaner TY6545RH Tefal Air Force 360 Flex TY9471Tefal Air Force 360 Flex TY9471 Tefal Compact Power Cyclonic TW3724Tefal Compact Power Cyclonic TW3724 Tefal Swift Power Cyclonic TW2922Tefal Swift Power Cyclonic TW2922 Tefal X-plorer Serie 120 AI Animal & Allergy RG7865WHTefal X-plorer Serie 120 AI Animal & Allergy RG7865WH Tefal Clean & Steam Revolution VP7751Tefal Clean & Steam Revolution VP7751 Tefal Silence Force TW7752Tefal Silence Force TW7752 Tefal Swift Power Cyclonic TW2913Tefal Swift Power Cyclonic TW2913 Tefal X-plorer Serie 60 RG7447WHTefal X-plorer Serie 60 RG7447WH Tefal Clean & Steam VP7591Tefal Clean & Steam VP7591 Tefal Air Force 360 Flex TY9472Tefal Air Force 360 Flex TY9472 Tefal Compact Power XXL TW4826EATefal Compact Power XXL TW4826EA Tefal Clean & Steam Revolution VP7777Tefal Clean & Steam Revolution VP7777 Tefal X-Touch TX9736WOTefal X-Touch TX9736WO