
ECO
MAX
BOOST
HIGH
CR 2032
ECO
MAX
BOOST
HIGH
3736
BEFORE THE FIRST USE
Pair your remote control before the rst usage. To be done
only once. Take off the plastic tab before the st use.
1. Switch on your appliance using the Power
button (picture below).
2. Press simultaneously and shortly MAX and
PAUSE buttons to enter the pairing mode ->
Product LED lights blink & you can hear a beep
it conrms the beginning of the pairing mode .
3. Right away, press on PAUSE button while LEDs
are blinking (you have around 10 sec to conrm
it - if not in time, you may go back to step 1).
Product LED lights will stop blinking and you
will hear a double beep pairing is done ->
Product LED lights will stop blinking and you
will hear the conrmation beep.
Congratulations ! You have successfully paired your
remote control.
If pairing failed within 10 seconds, please switch off your appliance.
Then go back to step 1 and follow the instructions for re-pairing.
POWER MODE
Your appliance has 4 power modes for different tasks. Change
cleaning modes using your remote control buttons and adjust
the power:
The LEDs indicate the
power modes.
In BOOST mode, all
three green lights will
ash on simultaneously.
BOOST : 5 min
Intensive cleaning for ground-in-dirt.
NB: Keep pressing the BOOST button to use this
m o d e .
MAX : 20/40 min*
Intensive cleaning and encrusted dust. Ideal
on all types of carpets.
HIGH: 40/50/90 min*
For maintenance cleaning. Ideal for all types
of hard oors.
ECO: 70/90/160 min*
For lightly soiled oors and delicate surfaces:
shelves, frames, curtains etc.
PAUSE :
Temporary shutdown during use.
POWER BUTTON ON/OFF
To turn on and off your
appliance, press shortlu
the Power button. To start
vacuuming, press on ECO,
HIGH or MAX speed on your
remote.
REMOTE CONTROL
Your appliance is managed by a remote control, integrated into the handle. It is powered by a
round battery type CR2032.
We advice you to change the battery
every 18 months.
In case the remote control was lost or
damaged, you can still use your appliance.
Press ON/OFF button for few seconds
and X-Ô will turn on in HIGH mode.
You can detach your remote control
to perform all your cleaning
sessions only with the exible hose
(ideal for cleaning your car, for
example).
SUCTION NOZZLE
Your 2-position nozzle is
equipped with a pedal switch
which allows you to alter
between the carpet or hard
oor position.
PARQUET
Hard floor position,
compatible with
wooden parquet,
tiles, linoleum etc.
CARPET OR RUG
POSITION
Carpet position,
perfect for in-depth
vacuuming of any
carpet or rug.
QUICK START GUIDE
QUICK START GUIDE
EN
How to use my
remote control?
Depending on model.
Добавить комментарий