Hiberg RFC-400DX NFGY inverter

Данная инструкция на русском языке предназначена для холодильника Hiberg RFC-400DX NFGY inverter, описывает принцип работы и основные моменты эксплуатации устройства. Перед первым включением рекомендуется внимательно изучить данное руководство.

Инструкция для холодильника представлена в формате PDF, который поддерживается на всех современных устройствах, так что сложностей с открытием файла возникнуть не должно. Но если открыть документ не получается, установите любую программу для чтения PDF файлов, например Acrobat Reader.

Чтобы распечатать инструкцию, нужно ее сначала скачать, для этого кликните по кнопке «Скачать инструкцию», файл откроется в новой вкладке, затем нажмите комбинацию клавиш Сtrl + P и из открывшегося диалогового окна, отправьте документ на печать.

Инструкция Скачать инструкцию (8.6 Мб, pdf)

Страницы: Стр: Предыдущая ← Следующая → 41 / 49

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49

An increase in the temperature of the walls of the device during operation is

absolutely normal. The heating element (heat exchanger) in models with NoFrost

system is built into the side walls of the refrigerator cabinet and closed with a

sheet of metal. When the compressor is running, the side walls heat up – the

tubes remove heat from the refrigerator compartments and heat the metal. The

tubes in the walls heat up the most when the refrigerator is running at full capacity

in order to reduce the temperature inside compartments as quickly as possible.

There is a lot of heat coming to the tubes, and they get very hot. After the

refrigerator lowers the temperature to working temperature (usually it takes

several hours), the tubes will start to cool down.

Error codes on the display

In case of an error a corresponding code will appear on the display (for example,

E0, E1, E2, etc.).

Please contact your local authorized service center.

DISPOSAL OF THE DEVICE

Disposal of refrigeration equipment is carried out in accordance

with the rules and regulations adopted by the local administration.

The main stages of disposal:

• disconnect the plug from the power supply and cut the power cord;

• the housing, doors and side parts of the equipment are subject to

disposal at landlls of household and industrial waste according to

the rules and requirements established by the local administration;

• burning of the thermal insulation of the housing and side parts is strictly

prohibited due to the release of toxic substances during burning;

• compressor, start-up relay, wiring, heat exchangers, aluminum prole doors

and fans can be disposed of as scrap of ferrous and non-ferrous metals at metal

processing plants;

• glass elements are disposed of at specialized glass recycling plants;

• lamps are disposed of at the appropriate specialized enterprises.

Proper disposal of refrigeration equipment after the end of its service life

(operation) will help prevent potentially harmful effects on the environment and

human health.

This product contains components made of combustible material and cannot

be disposed of together with ordinary household garbage (waste). For more detailed

information about the disposal of equipment, contact the city administration or the

disposal service.

Страницы: Стр: Предыдущая ← Следующая → 41

Комментарии (0)

Введите текст сообщения...

Hiberg RFC-400DX NFGY inverter

Добавить комментарий Отменить ответ