Hiberg i-DDQ9 - 812 W

Данная инструкция на русском языке предназначена для стиральной машины Hiberg i-DDQ9 - 812 W, описывает принцип работы и основные моменты эксплуатации устройства. Перед первым включением рекомендуется внимательно изучить данное руководство.

Инструкция для стиральной машины представлена в формате PDF, который поддерживается на всех современных устройствах, так что сложностей с открытием файла возникнуть не должно. Но если открыть документ не получается, установите любую программу для чтения PDF файлов, например Acrobat Reader.

Чтобы распечатать инструкцию, нужно ее сначала скачать, для этого кликните по кнопке «Скачать инструкцию», файл откроется в новой вкладке, затем нажмите комбинацию клавиш Сtrl + P и из открывшегося диалогового окна, отправьте документ на печать.

Страницы: Стр:
61www.hiberg.ru
CONNECTION THE ELECTRICITY AND WATER SUPPLIES
Connecting the water inlet hose
1. Connect one end of the water inlet hose to
a cold water tap and tighten by hand (see gure).
Before performing the connection, allow the
water to run freely until it is perfectly clear.
2. Connect the other end of the water inlet
hose to the water inlet valve on the rear of the
appliance and tighten by hand.
3. Turn on the tap slowly and make sure there
are no leaks.
Do not twist, squash, modify or cut the hose.
Tighten the end of the hose rmly by hand.
The supply water pressure must be in the 0.03-
1.0 MPa range. If the water pressure exceeds
this value, please t a pressure reducing valve.
If the hose is not long enough, contact a
specialized shop or an authorized technician.
Never use second-hand water inlet hose.
Use the new water inlet hose supplied with the washer.
Connecting the drain hose
Height of drain point
Height difference between the floor and drainage point: min. 60 cm (24 in.) and
max. 100 cm (39 in.).
Страницы: Стр: 59
Комментарии (0)

Добавить комментарий

Другие Стиральные машины Hiberg