
63www.hiberg.ru
We advise against the use of
drain hose extensions; in case
of absolute need, the extension
must have the same diameter as
the original hose and must not
exceed 250 cms in length.
Electric connection
Before plugging the washer into the mains socket, make sure that:
• The socket is earthed and in compliance with the applicable law.
• The socket is able to sustain the appliance’s maximum power load indicated on
the Technical Date Plate xed on the machine.
• The supply voltage is included within the values indicated on the Technical Date
Plate xed on the washer.
• When heating, the maximum current of the washer is 10A, so please make sure
that the power supply system (voltage, current and the cable) is applicable to
the load of the applied appliance.
• The socket is compatible with the washer’s plug. If this is not the case, replace
the socket or the plug by a qualied electrician.
WARNING! This appliance must be earthed. The following operations should
be carried out by a qualied electrician.
Replace the supply cable:
If the supply cord is damaged, it must be replaced with an identical one by the
manufacturer, its service agent or similarly qualied persons in order to avoid a
hazard – risk of electric shock.
Disposing of the plug:
Ensure that before disposing of the plug itself, you make the pins unusable so
that it cannot be accidentally inserted into a socket.
Disposing of the appliance:
When disposing of the washer please remove the plug by cutting the mains
cable as close as possible to the plug body and dispose of the plug as described
above.
The appliance is not intended to be operated by means of an external switching
device, Such as a timer, or separate remote controlled system.
When the appliance is installed, the mains socket must be within easy reach.
Добавить комментарий