Centek CT-1732
Данная инструкция на русском языке предназначена для холодильника Centek CT-1732, описывает принцип работы и основные моменты эксплуатации устройства. Перед первым включением рекомендуется внимательно изучить данное руководство.
Инструкция для холодильника представлена в формате PDF, который поддерживается на всех современных устройствах, так что сложностей с открытием файла возникнуть не должно. Но если открыть документ не получается, установите любую программу для чтения PDF файлов, например Acrobat Reader.
Чтобы распечатать инструкцию, нужно ее сначала скачать, для этого кликните по кнопке «Скачать инструкцию», файл откроется в новой вкладке, затем нажмите комбинацию клавиш Сtrl + P и из открывшегося диалогового окна, отправьте документ на печать.
19 20
7. Тейлөө борборуна кайрылганда, буюм таза түрүндө гана бери-
лет (шаймандын үстүндө тамактын калдыктары, чаң жана башка
кир заттар болбошу керек).
Өндүрүүчү шаймандын дизайнын жана мүнөздөмөлөрүн алдын
ала эскертүүсүз өзгөртүү укугун өзүнө калтырат.
ENGLISH
Dear Customer,
Thank You for purchasing a CENTEK brand product. We guarantee
flawless function of this item, provided the guidelines of its
operation are observed.
The refrigerator is a household appliance and is not intended for
industrial use!
This appliance is designed for use in domestic and similar
applications, in particular:
–in personnel kitchen zones at stores, offices and industrial
facilities;
–at agricultural farms;
–by clients at hotels, motels and other residential facilities;
–in private boarding houses.
PURPOSE OF THE APPLIANCE: For food cooling and/or freezing in a
heat-insulated chamber at low temperature.
1. SECURITY MEASURES
The device you purchase compiles with all official safety standards
applicable to electrical appliances in the Russian Federation.
To ensure safety and extend the service life, carefully read this
manual and the markings before using the device and follow the
following safety instructions. Save these instructions for future
reference.
ATTENTION!
Failure to comply with these safety measures may lead to
accidents.
–Use only a 220-240 V, 50 Hz power supply.
–When connecting, try not to use adapters and extension cords.
–Do not store flammable materials (gasoline, glue, ether, etc.) in
the refrigerator.
–Do not pour water on the refrigerator, as this may be dangerous
for you, and may also cause the refrigerator to break down.
–If you notice unusual noise, smell or smoke during operation of
the device, or other unusual signs of the device, it is necessary
to turn off the power and contact the service representatives.
• Avoid damaging the power cable:
• Do not replace the power cable.
• Do not place heavy objects on the power cable.
refrigerator, care must be taken not to damage any parts of the
refrigerant circuit.
–Coming out of the tubes, the refrigerant can ignite or harm your
health. If damage to the refrigerant circuit does occur, avoid any
kind of open fire or potential sources of ignition, and ventilate
the room where the refrigerator is located for a few minutes.
–In order to avoid the formation of a flammable mixture of gas
and air in the event of a refrigerant leak, the dimensions of the
room where the refrigerator is located must correspond to the
amount of refrigerant used in the refrigerator.
–The volume of the room should be 1 m3 for every 8 g of refrigerant
R600a in the refrigerator. The amount of refrigerant contained in
your particular refrigerator is indicated on the nameplate on the
back of the refrigerator.
–Never turn on the refrigerator with signs of damage. If you have
any doubts about the serviceability of the product, contact
customer service.
2. PACKAGE CONTENTS
–Refrigerator - 1 pc.
–User manual - 1 pc.
–Glass shelf - 4 pcs.
–Door shelf: CT-1732 - 5 pcs., CT-1733 - 6 pcs.
–Freezer container - 3 pcs.
–Container of the refrigerating chamber: CT-1732 - 1 pc., CT-1733
- 2 pcs.
–Tray for eggs - 2 pcs.
–Form for ice - 1 pc.
–Fastening for a door – 2 pcs.
APPLIANCE DESCRIPTION
1. LED-lamp
2. Refrigerator shelves
3. Freshness zone (CT-1733)
4. Freshness zone (CT-1732), zero zone (СT-1733)
5. Freezer containers
6. Adjustable feet
7. Door shelves
3. REFRIGERATOR TRANSPORTATION
When transporting or carrying the device, hold it by the bottom
and carry it in an upright position. Do not tilt the refrigerator more
than 450 degrees. Never turn it upside down. Do not place the
appliance on the sides or back. Do not transport the device if it is
lying on its side, on the back or on the front sides. Do not use the
door as a carrying aid. This can disable the device. The two rear
legs of the refrigerator are equipped with rollers. To move around
the kitchen and accurately install the appliance in place, tilt the
refrigerator slightly in the direction of the back wall and move it.
The two front legs of the refrigerator can be adjusted in height. In
order to align the device precisely, twist the front legs to the left
or right so that the device is securely on the floor.
After transporting and installing the refrigerator, wait about
three hours before connecting it to the mains to be sure that the
refrigerant has been properly distributed after transportation -
this is necessary for the refrigerator to work properly.
• Keep the power cable away from heat sources.
–When disconnecting the refrigerator from the mains, pull the
plug, not the power cord.
–The refrigerator is designed for indoor use.Don’t use it outdoors
in no case.
–The refrigerator should be used at home to store food in
accordance with these instructions.
–Do not allow children to use the appliance unattended.
–The refrigerator is a large-sized household appliance, it will
take at least two people to transport it.
–Do not touch the refrigerator with wet hands.
–Do not use extension cords, tees and adapters to avoid fire or
damage to the device. The manufacturer is not responsible for
fires that occurred due to the use of adapters and extension
cords, as well as a connecting cable whose cross section does
not correspond to the power consumption. 12. When installing
the refrigerator, it is necessary to check the compliance of the
network characteristics and electrical parameters indicated on
a special plate on the back of the refrigerator.
–Do not remove the plug from the outlet by the wire: this is very
dangerous.
–Do not move the appliance close to the mains plug.
–If the power cord is damaged, it should be replaced with a
special cord or kit provided by an authorized service center.
Cable replacement should only be carried out by qualified
personnel. Connect the device to an electrical outlett that has a
serviceable protection device (circuit breakers,fuses,ect.).
–Do not touch the internal cooling surfaces of the refrigerator.
–Disconnect the refrigerator from the mains before performing
any cleaning or maintenance operations. Setting the thermostat
knob to the «ВЫКЛ» (OFF) not enough to ensure electrical safety.
–It is prohibited to change the design of the refrigerator and the
intervention of persons not authorized by the manufacturer for
warranty repairs.
–Do not use electrical appliances inside the food storage
compartment unless recommended by the manufacturer.
–Do not store flammable gases or liquids inside the refrigerator.
–Do not store glass bottles and cans of liquid in the freezer.
OPERATING RECOMMENDATIONS
–Do not connect too many appliances to the same power supply
circuit, as this may cause a fire.
–If you do not plan to use the refrigerator for a long time,
disconnect its power plug from the outlet.
–Do not touch the inner walls of the low-temperature
compartment or the products lying in it with wet hands.
–Do not put bottles or other glass vessels in the low-temperature
compartment.
WARNING!
–Cooling in the refrigerator is provided by a refrigerant that
is filled into the refrigerator using special equipment. Do not
damage the refrigerant circulation tubes on the back of the
refrigerator.
–This product contains a small amount of refrigerant, which is
isobutane, a natural gas that does not harm the environment,
but is flammable. When transporting and installing the
4. INSTALLING THE REFRIGERATOR
Proper installation is necessary to ensure reliable and efficient
operation of the refrigerator. It is necessary to lift the refrigerator
by holding it by the bottom. Do not pull on the door or handle.
The manufacturer’s warranty does not cover damage to the
door as a result of its rearrangement. Repairs caused by such
circumstances will be carried out at the expense of the owner.
OVERHANGING DOORS
ATTENTION!
For rearranging the door, it is recommended to contact a qualified
specialist. If you decide to reinstall the refrigerator door yourself,
use the recommendations listed below in this manual.
Tools required: Philips screwdriver, flat screwdriver, Allen key.
–Remove the cap from the top hinge.
–Remove the top loop. Disconnect the power cable of the
displaying.
–Open the top door and carefully lift it up. The door should come
off the hinge and completely disengage from refrigerator.
–Use a screwdriver to remove the middle hinge.
–Remove the freezer door.
–Use a screwdriver to remove the hinge on the bottom refrigerator
parts. Turn over the hinge mount and reinstall the hinge as
shown in the figure below and install him to the opposite side.
–Install the freezer door on the bottom hinge.
–Use a screwdriver to install the middle hinge on the same side
as the bottom loop.
–Place the upper door on the middle hinge. Connect display power
cable.
–Use a screwdriver to install the top hinge, on the same side as
the rest.
–Place a cap on top of the hinge.
VENTILATION
The compressor and condenser of the refrigerator heat up during
operation, so it is necessary to provide sufficient ventilation to
the device.
–The refrigerator should be installed in a well-ventilated room
with normal humidity. It is forbidden to install a refrigerator in
rooms with high humidity, for example, in bathrooms, basements.
–When installing, ensure minimum gaps (3-5 cm) on the sides of
the device and 10 cm on top for free air circulation. Do not block
the air movement at the back of the appliance.
–Do not place near heat sources.
–Do not place the refrigerator in direct sunlight or near heat
sources (kitchen stoves, ovens, fireplaces).
ALIGNMENT
For the efficient operation of the refrigerator, it is important that it
is on a flat surface. After installing the refrigerator in place, adjust
its position by rotating the adjustment supports in its front part.
The tilt of the refrigerator back should not exceed 5°.
CONNECTION TO THE POWER SUPPLY
The refrigerator corresponds to the 1st class of protection against
electric shock and is connected to the electrical supply using a
Комментарии (0)
Другие Холодильники Centek
Добавить комментарий