EN - 49
ERROR TYPE MEANING WHY WHAT TO DO
E10 Fridge compartment is
not cold enough
Likely to occur after:
-
- Hot food has been left in
the fridge.
1. Set the fridge temperature to
a colder value or set Super
error code once the required
temperature has been reached.
Keep doors closed to improve
time taken to reach the correct
temperature.
2. Please empty the location
at the front area of air duct
channel holes and avoid
putting food close to the
sensor.
authorised technician needs to be
contacted.
E11 Fridge compartment is
too cold Various
1.
activated
2. Reduce the fridge
compartment temperature
3.
and not clogged
authorised technician needs to be
contacted.
your appliance
before contacting the after-sales service.
Your appliance is not operating
Check if:
The plug is correctly placed in the socket
The plug fuse or the mains fuse has
The socket is defective. To check this,
same socket.
The appliance performs poorly
Check if:
The appliance is overloaded
The appliance door is closed properly
There is any dust on the condenser
There is enough space near the rear and
Your appliance is operating noisily
Normal noises
Cracking noise occurs:
During automatic defrosting
When the appliance is cooled
appliance material).
Short cracking noise occurs: When
Motor noise: Indicates the compressor
is operating normally. The compressor
may cause more noise for a short time
Bubbling noise and splash occurs:
tubes of the system.
Due
container. This noise is normal during
defrosting.
Air blowing noise occurs: In some
models during normal operation of the
system due to the circulation of air.
The edges of the appliance in contact
with the door joint are warm
of the compressor, this is normal.
There is a build-up of humidity inside
the appliance
Check if:
Добавить комментарий