EN - 25 -
Installation warnings
Before using your fridge for the rst time, please pay attention to the following points:
• The operating voltage for your fridge is 220-240 V at 50Hz.
• The plug must be accessible after installation.
• Your fridge may have an odour when it is operated for the rst time. This is normal and
the odour will fade when your fridge starts to cool.
• Before connecting your fridge, ensure that the information on the data plate (voltage
and connected load) matches that of the mains electricity supply. If in doubt, consult a
qualied electrician.
• Insert the plug into a socket with an ecient ground connection. If the socket has no
ground contact or the plug does not match, we recommend you consult a qualied
electrician for assistance.
• The appliance must be connected with a properly installed fused socket. The power
supply (AC) and voltage at the operating point must match with the details on the name
plate of the appliance (the name plate is located on the inside left of the
appliance).
• We do not accept responsibility for any damages that occur due to
ungrounded usage.
• Place your fridge where it will not be exposed to direct sunlight.
• Your fridge must never be used outdoors or exposed to rain.
• Your appliance must be at least 50 cm away from stoves, gas ovens and
heater cores, and at least 5 cm away from electrical ovens.
• If your fridge is placed next to a deep freezer, there must be at least 2 cm between them
to prevent humidity forming on the outer surface.
• Do not cover the body or top of fridge with lace. This will aect the performance of your
fridge.
• Clearance of at least 150 mm is required at the top of your appliance. Do not place
anything on top of your appliance.
• Do not place heavy items on the appliance.
• Clean the appliance thoroughly before use (see Cleaning and Maintenance).
• Before using your fridge, wipe all parts with a solution of warm water and a teaspoon of
sodium bicarbonate. Then, rinse with clean water and dry. Return all parts to the fridge
after cleaning.
• Use the adjustable front legs to make sure your appliance is level and stable. You can
adjust the legs by turning them in either direction. This must be done before placing food
in the appliance.
• Install the two plastic distance guides (the parts on the black vanes -condenser- at the
rear) by turning it 90° (as shown in the gure) to prevent the condenser
from touching the wall.
• The distance between the appliance and back wall must be a maximum
of 75 mm.
Korting KNFC 71928 GN 
Korting KNFC 71863 B 
Korting KNFS 91797 GW 
Korting KNFR 1837 X 
Korting KNFS 91797 GN 
Korting KNFC 62029 GN 
Korting KNFC 71887 X 
Korting KSFI 1833 NF 
Korting KNFR 1837 N 
Korting KNF 1857 N 
Korting KSI 17860 CFL 
Korting KSI 17877 CFLZ 
Korting KNFC 61868 GN 
Korting KNFC 62010 B 
Korting KSI 1855 
Korting KNFM 81787 GM 
Korting KNFC 62029 W 
Korting KSI 8185 
Korting KSI 8181 
Korting KSI 8189 F
Добавить комментарий